In many localities, satellite TV and the Internet are the only way to keep in touch with the outside world. The quality of the signal going to the TV antenna leaves much to be desired or is completely absent, and high-speed Internet in rural areas is a rarity. Therefore, many are interested in how to connect satellite TV and the Internet on their own.
Instructions
Step 1
To connect satellite TV, find out if you can fix the satellite dish on the wall or roof of your house so that the receiver is directed to the south. If there are obstacles, such as houses and trees, that interfere with satellite reception, consider adding accessories to deal with the problem.
Step 2
Install a satellite dish. Connect a satellite receiver and a converter, adjust the quality of signal reception, if possible, bringing it to 90 - 100% in clear weather. If the signal quality is lower, then with low clouds and rain, the signal may completely disappear, especially for MPEG-4 TV channels, which are very sensitive to weather.
Step 3
Route the cable to the TV, connect and connect the receiver. Then insert the smart card into the slot of the satellite receiver and turn on the receiver.
Step 4
Configure the settings of the satellite operator to which you decided to connect (Tricolor TV, NTV-PLUS, etc.). After you set up TV and radio channels and check the signal strength and quality, call your operator's call center and ask to activate the smart card. The activation process takes 2-4 hours.
Step 5
To connect satellite Internet, use the services of specialists, as they will make your work faster and more reliable. But if you decide to connect on your own, then first set up the terrestrial DialUp or GPRS channel.
Step 6
Install and configure the DVB card and install the driver (eg Setup4PC) that comes with the DVB card. Configure the driver by entering the satellite name, transponder, speed, polarization, provider name. When installing, specify the need to configure a proxy connection.
Step 7
Download the GlobalX program from the Internet and configure it. In the settings, specify the server, port, username, password and other data.
Step 8
Set up a network connection, install any browser. Then connect to satellite internet.