If you want to set up a local network between two computers via the Bluaetooth channel with the ability to distribute the Internet, then you will need two adapters and software. It should be noted that such a network is limited by the range and bandwidth of the BlueTooth channel, so it cannot always be used.
It is necessary
- - two Bluetooth adapters;
- - disk with adapter drivers.
Instructions
Step 1
Connect BlueTooth adapters to computers or laptops between which you will be setting up a network. Install on each software that was to be sold with the device. If not, then go to the adapter manufacturer's website and download it. Drivers are generally free to download. Reboot your computers so that the installed application is saved in the registers.
Step 2
Start the BlueSoleil program, the shortcut of which should appear on the desktop after installing the adapter software. Go to the "My Services" menu and select "Properties". As a result, the settings window for BlueTooth will appear. Go to the "Lan Access" section and check the "Automatically enable this service every time I start my BlueTooth" box. Close the window.
Step 3
Go to the "My BlueTooth" menu and select "Properties". Open the "Accessibility" tab and activate the "Available for connection" communication mode. In search mode, select "Discovery access", and in pairing mode, check the box next to "accepts connections." Save your settings and close the window. Do the same on the second computer and restart the system.
Step 4
Run the BlueSoleil program on the computer for which you want to share the Internet. Click on the red circle located in the middle of the window. The app will then start searching for BlueTooth devices. When a second computer is found, the corresponding icon appears. Double click on it to start service discovery. A request for an access code will appear. Enter any value and run the program on the second computer. A similar request for the access code will be displayed, where you must specify the same combination.
Step 5
Wait for the LAN connection to be established. If you did everything correctly, the Internet connection window will start on the computer where the service discovery was carried out. Do not enter values in the login and password fields, as by default the connection will be carried out without authentication.
