To build home local networks, it is sometimes necessary to use several devices at once. For stable operation of the combined network, two ADSL modems may be required, each of which will perform the desired functions.
It is necessary
- - Splitter;
- - network cables.
Instructions
Step 1
If you have an ADSL modem with several LAN ports and a similar device that supports work with a Wi-Fi network, you need to properly configure their synchronous operation. This will allow several computers and mobile devices to be connected to the Internet at the same time. Connect a telephone cable to the DSL port of the multi-line modem. Use a splitter to reduce interference on the network.
Step 2
Connect the desired computers to the modem using the available LAN ports. Be sure to leave one port free. Turn on one of the computers and open the modem settings web interface. Establish and configure a connection to the provider's server. How to do this, it is better to check on the official forum of the company providing Internet access services
Step 3
Save your connection settings. Disable DHCP function. In this scheme, it is better to use static IP addresses. Connect this computer to the LAN port of another modem.
Step 4
Open its web interface. Select the WAN menu and configure it. In this case, you need to set the LAN channel as the main one. Those. the device should receive Internet access not through the DSL port, but through the LAN port. Use the IP address of the first modem as the DNS server (internet access point).
Step 5
Open the Wi-Fi menu and create a wireless hotspot. Select the desired wireless settings. Save the modem settings and disconnect the stationary computer from it.
Step 6
Connect the second ADSL modem to the first device using a network cable. To do this, use the free LAN ports of both modems. Reboot both devices. Wait until the modems are fully loaded. Connect mobile computers to a wireless network. Make sure all devices can access the internet.
