To configure synchronous Internet access from multiple computers, it is recommended to create local networks. In addition, they need to be able to properly configure them to avoid problems with creating shared resources.
It is necessary
Wi-Fi adapter
Instructions
Step 1
There are two ways to create a local area network between a computer and a laptop. To ensure the highest speed of information exchange, it is recommended to create a wired network. To keep your laptop mobile - wireless. In the event that you chose the second option, purchase a Wi-Fi adapter.
Step 2
Connect this device to a PCI port on your motherboard or USB, depending on the type of adapter you purchased. Install drivers for this hardware.
Step 3
Open the Network and Sharing Center. Go to the "Manage Wireless Adapters" menu. Click the Add button. Press the "Next" button to go to the network settings menu.
Step 4
Enter the name of the future network. Select your data encryption option (WEP or WPA-PSK). Set a password that matches the selected security type. Activate the "Save network settings" function. Click Next and then Finish.
Step 5
Open the properties of the wireless adapter. Proceed to the TCP / IPv4 Internet Protocol Configuration. Set the static IP address for this device to 100.100.100.1.
Step 6
Open the Internet connection settings on this computer. Go to the "Access" tab. Allow your wireless network to use this internet connection.
Step 7
Turn on your laptop. Activate the search for wireless networks. Connect to the Wi-Fi hotspot you created. Open your wireless adapter settings. Set the following values for the required items of this menu: - 100.100.100.2 - IP address;
- 100.100.100.1 - main gateway;
- 100.100.100.1 - alternative and preferred DNS servers.
Step 8
Disconnect the internet connection on the first computer. Reconnect this connection. Make sure you have internet access at.
