The main problem with almost any wireless device is a weak signal. You've probably come across the fact that the Wi-Fi transmitter does not cover the entire area that needs to be provided with communication. Problems with 3G and WiMAX can be attributed to the same category. You can even cope with this problem on your own. Enough to strengthen the wireless signal.
Instructions
Step 1
How to Boost Your Wi-Fi Signal 1. Reduce the number of walls and floors between the signal source and the receiving device. To do this, in a large organization, install a Wi-Fi transmitter in the corridor between the offices. 2. Install the source device so that the angle of propagation of the signal relative to the obstacle is 90 degrees. 3. Eliminate all sources of radio interference, such as system interference (computer, monitor, microwave oven). 4. Replace the antenna in the Wi-Fi signal source with a stronger one. To do this, it is enough to unscrew the old antenna and insert the one into its socket that will ensure the proper signal level. 5. Solder a wire to the place for attaching the antenna to the board. Screw the other end to the "dryer" grill of a conventional TV antenna with an amplifier. The cable for the wire must have a resistance of 50 ohms.
Step 2
How to Strengthen Yota Signal Use a stronger WiMAX antenna. This should significantly boost the signal level. The choice of antennas is great today. For example, a dedicated 30 dbi parabolic antenna can be used. A parabolic antenna will allow you to receive and transmit a signal in any plane relative to the horizon. Strengthening the Yota signal is necessary if the connection speed does not suit you, if you are at a considerable distance from the signal source, for example, in the country, if your router cannot establish a connection. As in the case of a Wi-Fi router, try soldering a new antenna yourself, including even a satellite one.
Step 3
How to amplify a 3G signal To strengthen a 3G signal yourself, you need to have: a) an external antenna, for example, satellite or TV; b) an internal antenna of a small size (it will become an adapter for a 3G modem); c) a coaxial cable with a resistance of 50 Ohm. The actions are elementary: 1. Install an outdoor antenna outside the window of your home. 2. Connect the cable to the external antenna as well as the internal antenna. 3. Attach the 3G modem to the internal antenna in any way possible. In addition, you can strengthen the signal of the 3G modem by carrying it, for example, to a window using a long USB cable.
