A Wi-Fi router is another unique benefit of civilization, which serves as a gateway between a high-speed modem, a computer and various gadgets. Thanks to this compact device, all household members will be able to use the Internet without unnecessary wires and connections.
Instructions
Step 1
First, connect the router to the network and connect the Ethernet cable. When doing this, use the Modem or Internet port, which is located on the back of the device and is usually highlighted with a color or a corresponding sticker. The port slot can also be located on the side. It all depends on the brand and model of the device.
Step 2
Then the tuning procedure begins. Connect the router to the system unit using the communication cable that came with the router. You can configure it both automatically - using a disk, or manually - through a browser. The first method will significantly reduce the time, but will reduce performance, since all settings will be basic. A wider range of functions are provided in the second method. Open any browser, enter "192.168.1.1" in the address building. A window will appear in which you should enter your username and password. Depending on the router model, the login and password is the word admin or user, if the user settings have not been changed.
Step 3
Thanks to this settings page, you can change literally all the parameters: the name of the wireless network, the presence of parental controls, the type of encryption to ensure network security, the password for gaining access. To configure the Internet itself, in the "Connection settings" section, enter the data of your provider. They can be found in the contract. After completing all the necessary manipulations, click the Save or Apply button.
Step 4
Next, reboot the router and wait until it connects to the ISP. This procedure usually takes about two minutes. When the connection is successful, the DSL indicator on the front panel will light up. If this does not happen, check the correctness of the entered data during setup or contact technical support. All parameters can be reset and reconfigured at any time. To do this, press the Reset button or hold the power on / off button for a few seconds.
Step 5
It is important to note that when configuring using a disc, you need to pay attention to the capacity of the system and the CD-carrier. If, for example, the operating system installed on the computer is 64-bit, and the disk is 32-bit, then they are completely incompatible with each other. When you try to start the disk in such a case, an error will crash. Usually, Error is written in the upper left corner of such a window. In this case, the required files can be found on the manufacturer's website. They are mainly found in the "Support" section.
