Integration of the SP3 service into the Windows operating system is carried out in four stages. First, the necessary data is prepared, after which the boot image files are extracted and direct integration, and finally a boot disk is created.
Necessary
- - Windows installation disc;
- - SP3 service.
Instructions
Step 1
Click on the "Start" button to bring up the main menu of the Windows operating system. Go to the "Control Panel" section, click on the "Organize" button and select "Folder Options". Open the "View" tab and check the box next to "Show hidden files and folders". Click the "OK" button to apply the changes.
Step 2
Create two folders in an arbitrary location. One is intended for a copy of the installation disk of the Windows operating system, in the second you need to copy the SP3 archive. It should be noted that the name of the folders should be indicated only in the Latin alphabet. Then open the main Start menu and run the Run command to unzip the file.
Step 3
In the Run command field, specify the path to the SP3 kb936929-sp3-x86-enu.exe file that you want to unzip. In this case, the file name must correspond to the installed version of the operating system. Click the "Open" button to start unpacking the selected file. After completing the operation, delete the archive from the created folder.
Step 4
Insert the installation disc into your computer. Enter in the command line the address to the cdimage.iso file located on the disk. Press the enter button. As a result, an image of the specified disk will be created, which will be placed in the second folder.
Step 5
Integrate the SP3 service with the operating system. To do this, enter the following text in the command line “_disk name _: / _ folder name with sp3_ / i386 / update / update.exe / integrate: _ disk name _: / _ folder name with OS_”. Press the enter button.
Step 6
Install any program for unpacking images. For example, you can use the Nero Burning ROM application. Run it and select the "Create Bootable CD" command. Open the Boot tab and mark the Image File line. Click the Browse button and specify the path to the image file. Confirm the command and wait until the disc is written.
