Using a network connection using Skylink phones has a number of undeniable advantages - in addition to guaranteeing the safety of devices, you get a higher connection speed than using gprs. To set up Skylink Internet, you just need to follow a few simple steps.
Instructions
Step 1
To use the Internet with your Skylink phone, you need to synchronize the device with your computer. This action can be performed using a data cable, which, as a rule, is not supplied with the phone, so you will need to purchase it separately. It is preferable to buy the cable from authorized Skylink centers, as in this you are insured against buying a fake. Included with the data cable, you will also find a disk with drivers that must be installed before connecting the phone to a computer. If the disc is missing, download the software from the site https://www.skylink.su, in the "Software for Skylink phones" section.
Step 2
Install the drivers. If they are packed in an archive, you need to extract them to a new folder. After connecting the phone to the computer, the operating system will ask you to install drivers from the disk or from the specified location. Specify the location of the files, then complete the installation and disconnect the phone from the computer, and then reconnect it. Make sure you do not need to reinstall the drivers. Launch your sync software and make sure it "sees" your phone.
Step 3
To access the Internet, you need to set up a new connection. Your actions may vary depending on the type of operating system, so it would be best to request technical support by calling Skylink customer service at +7 (495) 973-73-73. If this phone does not answer, find a new service number on the website https://skylink.ru/. Request assistance in setting up a connection, and then provide the version of the operating system on your computer, as well as any additional data that the operator may request. Follow the instructions exactly. After completing the configuration, start the created connection.
