In the setup menu of d-link network devices, the user can change various data. The login itself is carried out using a certain sequence of actions that novice users may not know about.
What is the d-link menu for?
The d-link network devices menu allows the user to change a huge amount of various information, one way or another related to the used router or modem. For the most part, only one configuration principle is used for the effective operation of a network device. If desired, the user can change the default values. For example, you can change the protection method, change the password for entering the network, username, network name, etc. It is worth noting that it is best not to go into the settings of the network device and change nothing there if you are not sure that you will do everything right. Even if some mistake was made, the user can reset all settings to factory settings (using the Reset button) and only then, do everything as it should.
How to access the d-link menu?
In order to enter the d-link menu (web interface), you need to open any convenient browser (it is advisable to use Internet Explorer when changing the standard settings). In the address bar, you must enter the address of the main network gateway (IP address) 192.168.0.1 or 192.168.1.1. It must be said that this address may have a different form. It directly depends on the manufacturer of the network device and its model. After a small window appears, the user will need to enter a username and password. Sometimes manufacturers of such devices write the factory login and password required to enter the web interface on the box itself. If it is not there, then you can try to write the standard values: login - admin, password - admin (or leave the field empty). According to the standard, these values are suitable for most devices of this kind.
If the entered login and password values were correct, then the user will automatically gain access to the settings (web interface) of his network device. Otherwise (if the login failed), this can only mean one thing - the master who connected the Internet changed the login and password to enter the d-link menu. Usually, in such cases, he had to leave a sheet with changed data, but sometimes they do not do this, for security reasons (so that the user does not go into the web interface and, for example, spoil the equipment). If there is no such information, then you can either call this master (if he left a contact phone number) or reset the settings to factory settings using the Reset button (usually located on the back of the router or modem) and try again to enter the d-link menu.
